Velleman VTLAMP3WN Manuel d'utilisateur télécharger pdf (Page 4)

VTLAMP3WN

23.11.2009 ©Velleman nv

6. Replacing the lamp

• Unplug the device from the mains and let the fluorescent

lamp cool down before replacing it.

• The lamp is located behind a plastic diffuser.

• Place a small flat screwdriver between diffuser and housing

as indicated [1]. Gently push on the screwdriver. Lift this

end of the diffuser [2] and slide [3].

• Carefully pull the defective lamp from its socket.

• Install a new lamp (order code LAMP09PL/2) into the

socket.

• Put the diffuser back.

7. Technical specifications

dioptre 3x

colour white

dimensions

glass 185 x 155mm

arm length 86cm

cable length 1.3m

colour temperature 6400K

power supply 230Vac

weight 3600g

spare lamp LAMP09PL/2

Use this device with original accessories only. Velleman nv cannot be held responsible in

the event of damage or injury resulted from (incorrect) use of this device.

For more info concerning this product, please visit our website www.velleman.eu.

The information in this manual is subject to change without prior notice.

The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.

No part of this manual or may be copied, reproduced, translated or reduced to any electronic

medium or otherwise without the prior written consent of the copyright holder.

1 2 3 4 5 6 7 8 9 ... 13 14

Pas de commentaire

Velleman VTLAMP3WN Manuel d'utilisateur Page 4