Velleman DCM266 Instructions d'exploitation télécharger pdf (Page 3)

DCM266 GB2

l When the jaw are open and will be connected to the conductor under test,

your fingers must keep behind the barrier indicator.

l Never ground yourself when taking electrical measurements. Do not touch

exposed metal pipes, outlets, fixtures, etc. which might be at ground

potential. Keep your body isolated from ground by using dry clothing,

rubber shoes, or any approved insulating material.

1.3 Symbols

1.4 Maintenance

l Before opening the meter, always disconnect test leads from all sources of

electric current.

l If any faults or abnormalities are observed, the meter can not be used any

more and it has to be checked out.

l Never use the meter unless the back cover and the battery cover are in

place and fastened fully.

l Do not use abrasives or solvents on the meter, use a damp cloth and mild

detergent only.

Important safety information, refer to the operating manual

Dangerous voltage may be present

Earth ground

Double insulation (Protection class II)

1 2 3 4 5 6 7 8 9 10

Pas de commentaire

Velleman DCM266 Instructions d'exploitation Page 3