Velleman CAMIP13 User manual Manuel d'utilisateur télécharger pdf (Page 3)

CAMIP13

V. 01 – 22/03/2012 3 ©Velleman nv

4. Overview

1 Mobile device

2 LAN port

3 Wireless router

4 WAN port

5 Modem

6 Network cable (RJ45)

7 CAMIP13

5. Installation: hardware

1. Fasten the round base of the bracket to where you want to install the camera with the supplied three

screws. For details about viewing angle and infrared range, refer to the documentation on the

included CD ROM.

2. Connect the camera with the joint lock connected to the bracket. Next, secure the joint lock.

6. Installation: cable connections

1 Network cable

2 Alarm in (Yellow)

3 GND (Brown)

4 RESET (Red)

5 GND (Black)

6 Alarm out (Pink)

7 Power cable

For your camera to work properly, you need to connect the camera cables as follows:

• Connect the network cable [1] to your network.

• Connect the Alarm in [2] and the GND [3] cables to a magnetic sensor, PIR sensor or relay.

• Plug the camera’s power cable [7] in the included power adapter and connect it to a power socket.

1 2 3 4 5 6 7 8 ... 32 33

Pas de commentaire

Velleman CAMIP13 User manual Manuel d'utilisateur Page 3