Velleman К8063 Manuel d'utilisateur télécharger pdf (Page 15)

‘F’ : Force all displays to address ‘1’ (return to factory settings).

‘A’ : Send ASCII to display. An easy way of displaying figures 0 to 9

Simply send their ASCII value. ( 32ascii blanks the display, 0 = 48ascii, 9 = 57ascii).

‘P’ : Decimal point control. Parameter 255 turns the decimal point on, parameter 0 turns it off. Decimal

point remains on until it has been forced off.

‘I’ : Brightness control. Parameter 255 set the display to ‘dim’, parameter 0 sets the display to ‘bright’.

Remark : For best results, we recommend to send the command string at least three times a row. When the

brightness is set to dim, it is recommended to send the string at least 4 times to make sure all displays are

updated.

Furthermore, we recommend a delay of at least 100ms between sending a command and sending the

‘Strobe’-command.

Hook-up

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

Velleman К8063 Manuel d'utilisateur Page 15