Velleman К8091 Manuel d'utilisateur télécharger pdf (Page 9)

construction

2. Power cable

+/- 45cm

• Cut 45cm of the included cable, measured from the female connector.

• Put both cables trough the hole on the rear cover of the housing.

• Strip the male and female cable.

• Connect the female cable/connector to the output connector

SK2, the male cable/connector to output connector SK1

• When both cables have been connected to the K8091EU

mount the strain relief and tighten up with the included 15mm

bolts and M3 nuts.

20mm

7mm

Twist & thin the wires!

L N N L

AC OUT

M3 bolt

Strain relief

M3 lock washer

M3 nut

SK1 SK2

SK1

SK2

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Velleman К8091 Manuel d'utilisateur Page 9