Velleman VM160 Manuel d'utilisateur télécharger pdf (Page 5)

Instructions for VM160

Instructions

How to learn a remote?

1- Press and hold “Setup” button.

2- Press and hold remote channel 1 button.

3- All LEDs light = remote accepted.

4- Release “Setup” button.

How to set the output function for each channel?

Select a timer function between “Moment” and “On/

Off”. A function is indicated by LEDs 1 to 4 and

column LED*.

1- Press and hold “Setup” button.

On a transmitter:

2- Press channel 1 button repeatedly to

select function for channel 1.

3- Press channel 2 button repeatedly to

select function for channel 2.

4- Press channel 3 button repeatedly to

select function for channel 3.

5- Press channel 4 button repeatedly to

select function for channel 4.

6- Release “setup” button.

* Note: LED on = left column selection.

To remove all remotes from memory :

 Turn off the power (disconnect power supply)

 Hold 'setup' button

 Turn on power (connect power supply)

 Mode led will blink.

 Release 'setup' when LED turns off

 This process takes about 10 seconds.

 If the button is released before the LED’s turn off, the memory will not be cleared.

 The unit will now respond to the default code only >> please also reset the transmitter code.

Instructions for VM160

Instructions

How to learn a remote?

1- Press and hold “Setup” button.

2- Press and hold remote channel 1 button.

3- All LEDs light = remote accepted.

4- Release “Setup” button.

How to set the output function for each channel?

Select a timer function between “Moment” and “On/

Off”. A function is indicated by LEDs 1 to 4 and

column LED*.

1- Press and hold “Setup” button.

On a transmitter:

2- Press channel 1 button repeatedly to

select function for channel 1.

3- Press channel 2 button repeatedly to

select function for channel 2.

4- Press channel 3 button repeatedly to

select function for channel 3.

5- Press channel 4 button repeatedly to

select function for channel 4.

6- Release “setup” button.

* Note: LED on = left column selection.

To remove all remotes from memory :

 Turn off the power (disconnect power supply)

 Hold 'setup' button

 Turn on power (connect power supply)

 Mode led will blink.

 Release 'setup' when LED turns off

 This process takes about 10 seconds.

 If the button is released before the LED’s turn off, the memory will not be cleared.

 The unit will now respond to the default code only >> please also reset the transmitter code.

1 2 3 4 5 6 7 8 9 10 ... 19 20

Connection diagram VM160 18
5 410329 416812 20

Commentaires sur ces manuels

Pas de commentaire

Velleman VM160 Manuel d'utilisateur Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Velleman VM160