Velleman VM162 Manuel d'utilisateur télécharger pdf (Page 5)

TRANSMITTER INSTRUCTIONS

Transmitter instructions

At first power-on, the unit will run in demo-mode. Every now and then, the colour will automatically change. As soon as a

transmitter is learned to the unit, the demo-mode will be deactivated. Returning to demo-mode is not possible.

The transmitter comes with a factory set default code, it can be desired to change the code:

Open the enclosure :

2. Return to the default code :

open

1. Hold SW1 (left button).

2. Briefly press the 'program'-button (SW3) 3 times.

The LED will flash 3 times.

3. Release SW1.

4. Your unique 32-bit code has been generated and stored.

1. Changing the code :

1. Hold SW1 (left button).

2. Hold the 'program'-button (SW3). After +/- 10s the led will flash 5 times.

3. Release both buttons.

4. Your code has been erased.

3. Learn the remote to receiver :

Press and hold both buttons until leds flash and the unit turns off.

You can learn up to eight transmitters. If you learn a ninth transmitter, the first transmitter will be deleted (first in – first out

principle).

SW3

SW1

SW2

LED

1 2 3 4 5 6 7 8 9 10 ... 15 16

Pas de commentaire

Velleman VM162 Manuel d'utilisateur Page 5