Velleman VDPLP56SL Manuel d'utilisateur télécharger pdf (Page 7)

VDPLP56SL

23.07.2010 ©Velleman nv

7-Channel Mode

channel function from to description

1 red 000 255 dimmer 0 ~ 100%

2 green 000 255 dimmer 0 ~ 100%

3 blue 000 255 dimmer 0 ~ 100%

4 colour macros

000 015 no function

016 255 colour macros

speed

(channel 6 @ 032 ~ 223)

000 255 slow ~ fast

strobe

(channels 1 ~ 4 only)

000 015 no function

016 255 slow ~ fast (6 Hz ~ 18 Hz)

mode

(channel 5 controls speed

when channel 6 = 032 ~

223)

000 031 RGB

032 063 pulse 0 ~ 100% with RGB faders

064 095 pulse 100 ~ 0% with RGB faders

096 127 pulse 0 ~ 100 ~ 0% with RGB faders

128 159 auto fade

160 191 auto switch (3 colours)

192 223 auto switch (7 colours)

224 255 sound control

7 dimme

000 255 dimmer 0 ~ 100%

Setting the DMX Starting Address

All DMX-controlled devices need a digital start address so that the correct device responds to the

signals. This start address is the channel number from which the device starts to “listen” to the DMX

controller. Enter the correct number and read it from the display located on the base of the PAR56.

You can use the same starting address for a whole group of devices or enter an individual one for

every device. When all devices have the same address, all the PAR56s will “listen” to the control signal

on one particular channel. In other words: changing the settings of one channel will affect all devices

simultaneously. If you set different addresses, each device will “listen” to a separate channel number.

Changing the settings of one channel will only affect the device in question.

In the case of the 3-channel PAR56, you will have to set the start address of the first PAR56 to 1, the

second PAR56 to 4 (1 + 3), the third to 7 (4 + 3) and so on.

9. Troubleshooting

oblem possible solution

fuse keeps blowing check total load placed on fixture

chase is too slow check user manual for speed adjustment

fixture has no power

check for power on mains

check fixture’s fuse

fixture is not responding

check DMX settings for correct addressing

check DMX cables

check polarity switch settings

check DMX indicator on LCD display

fixture is powered on but

there is no movement to

the audio

check audio mode on the LCD display

adjust sound sensitivity knob

light will not come on after

power failure

check fuse

signal loss

use DMX cables only

install terminator

keep DMX cables separated from power cables or blacklight

no light output call service technician

10. General Maintenance

To maintain optimum performance and minimize wear fixtures should be cleaned frequently. Usage and

environment are contributing factors in determining frequency. As a general rule, fixtures should be

cleaned at least twice a month. Dust build-up reduces light output performance and can cause

overheating. This can lead to reduced LED life and increased mechanical wear. Be sure to power off

fixture before conducting maintenance.

1 2 3 4 5 6 7 8 9 10 11 12 ... 33 34

Commentaires sur ces manuels

Pas de commentaire

Velleman VDPLP56SL Manuel d'utilisateur Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Velleman VDPLP56SL