Velleman K8200 Manuel d'utilisateur télécharger pdf (Page 41)

As soon as you have pressed this button the print bed will move towards the micro switch that your finger is

resting on. Quickly press the micro switch. If the micro switch is working correctly the bed will stop.

If the bed has stopped the micro switch wiring for the Y AXIS is correct.

Next move the Z CARRIAGE about 20 cm (7.87") UP by turning the motor for the Z AXIS by hand. Do not use the UP

button in the manual control panel.

1 2 ... 36 37 38 39 40 41 42 43 44 45

Pas de commentaire

Velleman K8200 Manuel d'utilisateur Page 41