Velleman WS1080 Manuel d'utilisateur télécharger pdf (Page 6)

WS1080

V. 13 – 12/12/2013 6 ©Velleman nv

Rain

1. Touch the rain section once and press + or – to switch between

1h, 24h, week, month, and total rainfall display.

2. Touch the rain section a second time and press + or – to switch

between the rainfall display in mm or inches.

3. Touch the rain section a third time and press + or – to set the

high rainfall alarm (HI AL), or press ON/OFF to switch the alarm

on or off.

4. Touch the rain section a fourth time to display the maximum

rainfall reading. Hold the value pressed to reset the value.

5. Touch the rain section a fifth time and press CLEAR to reset all

rainfall values.

Weather Forecast

1. Touch the weather forecast section once and press + or – to

switch between sunny, partly cloudy, cloudy, and rainy display.

2. Touch the weather forecast section a second time and press +

or – to set the pressure threshold from 2-4 hPa.

3. Touch the weather forecast section a third time and press + or

– to set the storm threshold from 3-9 hPa.

Pressure

1. Touch the pressure section once and press + or – to switch

between absolute pressure and relative pressure display.

2. Touch the pressure section a second time and press + or – to

switch between pressure display in hPa, inHg, or mmHg.

3. Touch the pressure section a third time and press + or – to set

the relative pressure value.

4. Touch the pressure section a fourth time and press + or – to

set the high pressure alarm (HI AL), or press ON/OFF to switch

the alarm on or off.

5. Touch the pressure section a fifth time and press + or – to set the low pressure alarm (LO AL), or

press ON/OFF to switch the alarm on or off.

6. Touch the pressure section a sixth time to display the maximum pressure reading. Hold the value

pressed to reset the value.

7. Touch the pressure section a seventh time to display the minimum pressure reading. Hold the value

pressed to reset the value.

Note: When the absolute pressure is selected, step 3 will be skipped.

Pressure Bar Graph

Touch the pressure bar graph once and press + or – to switch between the 12h and 24h pressure

history.

Time

Note: The DCF function will only work if the outdoor sensor

receives the signal.

1. Touch the time section once and press + or – to adjust the

contrast level (from 0 – 8, default 5).

2. Touch the time section a second time and press + or – to select the time zone.

3. Touch the time section a third time and press + or – to select the 12h or 24h time display.

4. Touch the time section a fourth time and press + or – to set the hour.

5. Touch the time section a fifth time and press + or – to set the minutes.

1 2 3 4 5 6 7 8 9 10 11 ... 48 49

Commentaires sur ces manuels

Pas de commentaire

Velleman WS1080 Manuel d'utilisateur Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Horloge Velleman WS1080