Velleman AVM360 Manuel d'utilisateur télécharger pdf (Page 4)

AVM360 VELLEMAN 4

• Handle the multimeter gently and carefully. Dropping it can damage the circuit boards and case and can cause

the multimeter to work improperly.

• Use only fresh batteries of the required size and type. Always remove old or weak batteries.

If you do not plan to use the multimeter for a month or more, remove the batteries. This protects the multimeter

from possible leakage.

• Disconnect the test probes before opening the multimeter.

• Replace blown fuse only with same size and type :

F 1.5A / 250V

• If any faults or abnormalities are observed, do not use this device and let it check by authorised personnel.

• Never use the meter unless the back cover is in place and fastened fully.

• To clean the meter, use a damp cloth and mild detergent only, do not use abrasives or solvents.

2. Description of the meter

 Indicator zero corrector

 Range selector switch knob

 Measuring terminal +

 Measuring terminal - COM (common)

 DC 10A terminal

 0 Ω adjusting knob

 Panel

 Indicator Pointer

 Rear case bolt

 Rear case

3. Reference table for reading

1 2 3 4 5 6 7 8 9 ... 29 30

Pas de commentaire

Velleman AVM360 Manuel d'utilisateur Page 4