
CU2200_v5 VELLEMAN 5
• Control Centre Number & Health Reporting Schedule Setup
These two values are configured by one single command.
(1) The control centre number is the phone number receiving the periodic report and regular report. Besides
the periodic report on schedule (command 5: power-up message), report of any command will be sent to this
number in addition to the mobile phone number sending the command. Maximum 2 control centres can be
defined.
Command: PWD:XXXX,CTRZ:YYYYYYYYYYY,MM#%
XXXX Password
Z Control centre number (max. 2 centres)
1 means 1
st
centre number
2 means 2
nd
centre number
YYYYYYYYY Phone number in control centre
MM Period code of automatic scheduled health report
Example:
PWD:1234,CTR1:123456789,04#%
Password: 1234
Reporting health status every hour (refer to the reference table below)
(2) The periodic health report and any command from another mobile phone will be reported to the first control
centre with number 123456789.
Reference table for the automatic scheduled health report
00 No automatic report 07 Every 6 hours
01 Every 5 minutes 08 Every 12 hours
02 Every 15 minutes 09 Every day (08h00)
03 Every 30 minutes 10 Every odd day (08h00)
04 Every 1 hour 11 1
st
, 7
th
, 14
th
, 21
st
, 28
th
day (08h00)
05 Every 2 hours 12 1
st
, 15
th
day (08h00)
06 Every 3 hours 13 1
st
day of each month (08h00)
The CU2200 automatically reports the unit’s health status on a pre-defined schedule via an SMS message.
[SMS message received]
ST:XXX;T:2006/10/08/06:15;V:XXXX;A1:0000;A2:0000;K1:X;K2:X;K3:X;K4:X;K5:X;K6:X;K7:X;K8:X;OUT1:1;O
UT2:1;OUT3:1;#
ST Unit serial number XXX ASCII code
T Unit internal clock XXXX Year/month/day/time
V Operating voltage XXXX
K1 Alarm channel 1
K1:0 means closed
K1:1 means open
K1 ~ 8 Alarm channel 1 ~ 8
OUT1 Relay output 1
OUT1:0 means open
OUT1:1 means closed
OUT1 ~ 3 Relay output 1 ~ 3
Commentaires sur ces manuels