Velleman DVM2000 Manuel d'utilisateur télécharger pdf (Page 7)

DVM2000 VELLEMAN

o Select the ACV or dBm measurement mode by pressing SELECT.

o Connect the measuring probes to the circuit.

o Read the measured value. Select a higher range by pressing RANGE when ol is displayed.

• DCV/DCV + ACV Measurements

Voltage ranges: 0.5VAC~1000VAC

o Switch on your multimeter and set to rotary selector switch to

o Insert the red and the black measuring probes in the V/Ω/Hz and the COM terminals respectively.

o Select the DCV or DCV + ACV measurement mode by pressing SELECT.

o Connect the measuring probes to the circuit.

o Read the measured value. Select a higher range by pressing RANGE when ol is displayed.

• DC mV/AC mV/DC mV + AC mV Measurements

Voltage ranges: 1µV~500mV

o Switch on your multimeter and set to rotary selector switch to

o Insert the red and the black measuring probes in the V/Ω/Hz and the COM terminals respectively.

o Select the DC mV, AC mV or DC mV + AC mV measurement mode by pressing SELECT.

o Connect the measuring probes to the circuit.

o Read the measured value. Select a higher range by pressing RANGE when ol is displayed.

Do not measure voltages exceeding 1000V.

1 2 3 4 5 6 7 8 9 10 11 12 ... 79 80

Pas de commentaire

Velleman DVM2000 Manuel d'utilisateur Page 7